Thursday, March 29, 2018

By Raymond Walker


Materials that are inflammable offer good services when used in the construction of structures such as houses. This is because they cannot catch fire in case there is an occurrence of fire. Despite the advantages that they have, they too have the negative side regarding health issues; they can affect the skin and also if inhaled can cause respiratory diseases. Therefore to minimize this effect, the measures discussed below should be put into consideration when handling Asbestos Chicago.

The most important safety tip is to ensure you wear a respirator when working in sites that are suspected to contain asbestos. This will prevent inhaling the harmful dust to the lungs with will cause health problems that are related to the lungs later. Also, people are advised to use appropriate footwear and gloves to avoid contact with the noncombustible material in any part of their bodies.

Another precaution to observe is to avoid working on the dry noncombustible. In this case instead, the surfaces to be worked on the need to be kept wet by using water. The water assists in keeping the dust particles in contact hence preventing their escape to the other areas where they are not supposed to go. This is considered as a vital safety measure.

Using water sprayers with low pressure are recommendable. The ones with high pressure are used they scatter the offcuts and debris from asbestos instead of ensuring that they are thickened. This will cause a health hazard even to other people who are out of the working area. Tools that are abrasive need to be avoided too since they bring about an increase in the amount of dust produced.

Asbestos when poorly handled can cause a range of health problems including skin disorders and cancer among others. Due to this then, the constructors are advised that when they are done with their works, they should ensure they clean themselves. The hands must be thoroughly cleaned even if the gloves were used to ensure that there are no traces of these particles left.

In cases where the working is done outdoors, it is advisable that the doors and windows be closed to prevent entry of noncombustible fibers to the building. The air vents to the house should also be covered. Also, the contamination of the soil should be avoided by using the heavy plastic sheets. This will help to absorb dust that comes from the work area.

In instances where the working is to be undertaken in the houses, the inhabitants of these houses should be advised to stay far away from the location where the work is carried out. Further, still, the openings in the working place such as door and windows must be kept shut to avoid the spread of dust if they will be produced. While closing the internal openings, the externals should be left open to allow for air circulation.

After the completion of work, thorough cleaning of the area and the materials used must be employed. The waste products need to be assembled and sealed in bags. The cleaning should be done with rags that are wet to avoid inhaling the dust is present. Other tools such as brushes cannot be cleaned hence people should not bother cleaning them. Instead, they must be packaged with other waste materials.




About the Author:



0 commentaires:

Post a Comment